White Cotton T-Shirt QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Inspection Report: Men's White Cotton T-Shirt

This comprehensive QC report evaluates a standard men's white cotton t-shirt, focusing on construction, materials, and finishing details that determine overall quality and value.

Material and Fabric Assessment

The t-shirt is constructed from 100% cotton fabric with a medium weight of approximately 180-200 GSM. The fabric shows consistent weave density with no visible thin spots or irregularities. Color is uniformly bright white without yellowing or discoloration. The cotton has been pre-shrunk, showing minimal shrinkage potential (estimated 2-3% maximum). Fabric hand feel is soft with appropriate drape characteristics for a basic t-shirt.

Construction and Stitching Analysis

All seams demonstrate professional construction with consistent 12-14 stitches per inch. Key areas inspected include:

Shoulder seams: Flatlock stitching with proper tension and no puckering
Side seams: Double-needle coverstitch with even spacing
Neckline: Ribbed collar with reinforced stitching at shoulder junctions
Hem: Double-turned hem with straight, parallel stitching
Sleeve attachments: Smooth set-in construction without gathering

No loose threads, skipped stitches, or tension issues were observed. All seam allowances are properly finished to prevent fraying.

Fit and Sizing Verification

The t-shirt matches standard men's sizing specifications. Measurements taken include:

Chest (pit-to-pit): 21 inches (as labeled for Medium)
Length (back neck to hem): 28 inches
Shoulder width: 18 inches
Sleeve length: 8 inches from shoulder seam

All measurements are within acceptable tolerance of ±0.5 inches. The garment shows symmetrical construction with left/right measurements matching precisely.

Finishing and Presentation

The t-shirt exhibits excellent finishing with no manufacturing defects. Inspection revealed:

No fabric stains, marks, or discoloration
Clean, straight hem lines on sleeves and bottom
Properly aligned neck ribbing without twisting
Accurate size and care label placement
No odor from chemicals or dyes

The garment has been properly pressed and folded for retail presentation. Overall construction quality meets or exceeds expectations for this price point category.

Check current price & stock

QC Inspection 1 - White Cotton T-Shirt for Men

QC Inspection 2 - White Cotton T-Shirt for Men

QC Inspection 3 - White Cotton T-Shirt for Men

QC Inspection 4 - White Cotton T-Shirt for Men

How to Inspect White Cotton T-Shirt QC Photos

When viewing Quality Control (QC) photos for the White Cotton T-Shirt, pay close attention to the following details:

1. Check Fabric Quality

Examine the cotton fabric for consistent weave density, weight, and color uniformity. Look for thin spots, discoloration, or manufacturing marks. Verify the fabric feels soft and has appropriate drape. Check care labels for fabric composition and pre-shrinking information.

2. Inspect Stitching and Seams

Review all seams including shoulders, sides, neckline, and hems. Look for consistent stitch density (12-14 stitches per inch), proper tension, and no skipped stitches. Check for loose threads, puckering, or uneven seams. Verify seam finishes prevent fraying and reinforce stress points.

3. Verify Measurements and Fit

Measure key dimensions: chest (pit-to-pit), length, shoulder width, and sleeve length. Compare to size chart specifications with ±0.5 inch tolerance. Check for symmetrical construction by comparing left/right measurements. Ensure the garment lays flat without twisting or distortion.

4. Examine Finishing Details

Inspect for stains, marks, or discoloration on the white fabric. Check hem lines for straightness and even width. Verify neck ribbing alignment and attachment. Examine labels for proper placement and legibility. Look for any odor from chemicals or improper washing.