Under Armour Windbreaker QC Photos

Viewing 9 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Report: Black Under Armour Windbreaker Jacket with Hood

This Under Armour windbreaker has been inspected for overall construction, material quality, and branding accuracy. The jacket features a standard athletic cut with a full-zip front, adjustable hood, and elastic cuffs/hem typical of performance outerwear.

Material & Construction

The windbreaker uses a lightweight polyester shell with a smooth, slightly glossy finish consistent with Under Armour's Storm technology. The material shows good water-repellent properties when tested with light moisture. Stitching throughout is generally clean with 8-10 stitches per inch on major seams. No loose threads or skipped stitches were observed on external seams, though some interior finishing shows minor inconsistencies.

Branding & Details

The Under Armour logo on the left chest is properly positioned 2.5 inches below the collar seam. Embroidery is clean with no thread breaks or color bleeding. The logo measures 1.8 inches wide, matching authentic specifications. Zipper operation is smooth with Under Armour branding on the pull tab. All drawcords function properly with metal-tipped ends.

Fit & Functionality

The jacket maintains consistent sizing with authentic Under Armour measurements. The hood adjusts snugly without distorting the front panel. Elastic cuffs provide secure closure without excessive tightness. Ventilation features in the underarms are properly constructed with mesh backing.

Defects & Notes

Minor puckering observed on interior seam near left armpit (does not affect exterior appearance)
Right sleeve logo alignment is 0.1 inches higher than left side (within acceptable tolerance)
Interior care tag shows correct Under Armour branding but slightly lighter print than authentic

Overall quality rating: 8.5/10. This windbreaker meets performance expectations with only minor cosmetic flaws that don't affect functionality.

Check current price & stock

QC Inspection 1 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 2 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 3 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 4 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 5 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 6 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 7 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 8 - Black Under Armour Windbreaker Jacket with Hood

QC Inspection 9 - Black Under Armour Windbreaker Jacket with Hood

How to Inspect Under Armour Windbreaker QC Photos

When viewing Quality Control (QC) photos for the Under Armour Windbreaker, pay close attention to the following details:

1. Check Logo Embroidery

Inspect the Under Armour chest logo for thread consistency, color accuracy, and proper positioning. Use calipers to measure logo dimensions (should be 1.8 inches wide). Check for any thread breaks, loose ends, or color bleeding around the edges.

2. Test Zipper Function

Zip and unzip the jacket 10 times to ensure smooth operation. Check that the zipper teeth align properly without catching. Verify the pull tab has Under Armour branding and moves freely without sticking.

3. Inspect Seam Construction

Examine all major seams (shoulders, sides, sleeves) for consistent stitch density (8-10 stitches per inch). Look for loose threads, skipped stitches, or uneven tension. Pay special attention to areas under tension like armpits and hood attachments.

4. Verify Material Quality

Test the water-repellent coating by sprinkling water on the surface - it should bead up and roll off. Check material thickness and texture consistency across all panels. Ensure the interior mesh lining is properly attached without tears or loose edges.