Tommy Hilfiger Black Hoodie QC Photos

Viewing 3 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Tommy Hilfiger Black Hoodie Quality Control Report

This detailed inspection covers the Tommy Hilfiger Black Hoodie with Logo Front, focusing on construction, materials, and branding accuracy. The hoodie features a classic design with front logo embroidery, ribbed cuffs and hem, and a kangaroo pocket.

Construction & Stitching

The overall construction is solid with consistent stitching throughout. Key areas inspected:

Shoulder seams: Straight and reinforced with no puckering
Side seams: Even and properly aligned with minimal thread tension issues
Hood attachment: Secure with double stitching at stress points
Cuffs and hem: Ribbing is evenly attached with no loose threads
Kangaroo pocket: Well-positioned with reinforced corners

Logo & Branding

The front logo embroidery is a critical quality point:

Thread color: Correct red, white, and blue combination
Stitch density: Consistent throughout the logo with no gaps
Placement: Centered on chest area, 8 inches from collar
Back neck label: Properly stitched with correct care instructions
Size tag: Accurate size labeling with proper font and spacing

Fabric & Materials

The hoodie uses a cotton-polyester blend fabric:

Weight: Medium-weight fleece (280-300 GSM)
Color: Consistent black dye throughout with no fading
Texture: Soft interior with smooth exterior surface
Drawstrings: Proper length with metal aglets intact
Zipper (if present): Smooth operation with Tommy Hilfiger pull tab

Sizing & Fit

Measurements correspond to standard sizing chart:

Chest: 22 inches (flat measurement for Medium)
Length: 27 inches from shoulder to hem
Sleeve: 25 inches from shoulder to cuff
Hood: Adequate size with proper shaping

Overall quality meets expectations for this price point. Minor variations in stitching tension are within acceptable limits. The logo embroidery shows good craftsmanship with clean edges and proper thread tension.

Check current price & stock

How to Inspect Tommy Hilfiger Black Hoodie QC Photos

When viewing Quality Control (QC) photos for the Tommy Hilfiger Black Hoodie, pay close attention to the following details:

1. Inspect Logo Embroidery

Examine the front logo for thread consistency, color accuracy, and stitch density. Check for loose threads, gaps in embroidery, and proper alignment. The logo should be centered on the chest with clean edges and no puckering of the fabric underneath.

2. Check Stitching Quality

Review all seams including shoulders, sides, hood attachment, and pocket corners. Look for consistent thread tension, straight lines, and reinforced stress points. Pay special attention to ribbed cuffs and hem where stitching meets different fabric types.

3. Verify Fabric & Materials

Assess fabric weight, color consistency, and texture. Check for proper dye penetration (no fading), correct fleece weight, and smooth zipper operation if applicable. Verify drawstring length and aglet condition.

4. Measure Sizing Accuracy

Take flat measurements of chest, length, and sleeves. Compare against the size tag and standard sizing charts. Check that all measurements are consistent and within acceptable tolerances for the labeled size.