Spider Star T-Shirt QC Photos

Viewing 5 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Spider Star Print T-Shirt Quality Control Report

This comprehensive inspection covers the Spider Star print T-shirt in available colorways: Black, Yellow, Beige, and Grey. The item features a distinctive spider web and star graphic print, requiring careful evaluation of print quality, fabric consistency, and construction details across all color variations.

Print Quality Assessment

The graphic print should exhibit sharp, clean edges with no bleeding between colors. The spider web pattern must maintain consistent line thickness throughout, while star elements should show precise geometric shapes without distortion. Color saturation should match reference images, with particular attention to the yellow variant's vibrancy and the grey variant's subtle tonal accuracy.

Construction and Materials

Fabric: 100% cotton jersey should have consistent weight (180-200 GSM) across all colorways, with no thin spots or pilling
Stitching: Double-needle hemming on sleeves and bottom with reinforced shoulder seams
Neckline: Ribbed collar must maintain shape after stretching, with even stitching around entire circumference
Tagging: Care labels properly attached with correct washing instructions for each fabric type

Color-Specific Considerations

Black variant requires checking for dye consistency without purple/green undertones. Yellow must avoid orange discoloration. Beige should maintain neutral warmth without grey cast. Grey needs uniform pigment without patchiness. All colors must resist fading after initial wash test.

Sizing and Fit Verification

Measurements must correspond to size chart specifications within ±2cm tolerance. Shoulder seams should align with anatomical shoulder points. Garment must lay flat without twisting, with side seams perpendicular to hem. Print positioning should be centered 8-10cm below collar on all sizes.

Check current price & stock

QC Inspection 1 - Spider Star Print T-Shirts - Black, Yellow, Beige, Grey

QC Inspection 2 - Spider Star Print T-Shirts - Black, Yellow, Beige, Grey

QC Inspection 3 - Spider Star Print T-Shirts - Black, Yellow, Beige, Grey

QC Inspection 4 - Spider Star Print T-Shirts - Black, Yellow, Beige, Grey

QC Inspection 5 - Spider Star Print T-Shirts - Black, Yellow, Beige, Grey

How to Inspect Spider Star T-Shirt QC Photos

When viewing Quality Control (QC) photos for the Spider Star T-Shirt, pay close attention to the following details:

1. Print Alignment Check

Verify the spider star graphic is centered horizontally and vertically on the chest. Use a measuring tape to ensure equal distance from collar to top of print (8-10cm) and from side seams to print edges. Check that the design isn't skewed or rotated on the fabric.

2. Color Consistency Inspection

Compare each color variant against reference swatches under natural light. Check for dye uniformity across entire garment, especially at seams where color pooling may occur. Verify that printed colors match Pantone references, particularly the yellow's brightness and grey's neutrality.

3. Stitch Quality Evaluation

Examine all seams with 10x magnifier for consistent stitch density (12-14 stitches per inch). Check for loose threads, skipped stitches, or tension issues. Pay special attention to shoulder and sleeve attachments where stress occurs. Ensure double-needle hems are parallel and even.

4. Fabric and Wash Test

Perform hand-wash test on fabric swatch to check colorfastness and shrinkage. Verify GSM weight matches specifications. Test stretch recovery by pulling fabric 5cm and releasing - it should return to original shape. Check for pilling by rubbing fabric surface with white cloth.