Saint Tears Hoodies QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Saint Tears Graphic Hoodies Collection Quality Control Report

This comprehensive inspection covers the Saint Tears Graphic Hoodies Collection, focusing on construction, materials, and design execution. The collection features bold graphic prints on heavyweight cotton-blend hoodies with attention to streetwear aesthetics.

Material and Construction Assessment

The hoodies utilize a 80% cotton/20% polyester blend fabric with a weight of approximately 400gsm. The material shows good density with minimal pilling after initial inspection. The interior features a soft fleece lining that maintains consistent thickness throughout all panels.

Stitching: Double-needle stitching on all major seams with consistent 12-14 stitches per inch. No loose threads or skipped stitches observed.
Ribbing: Waistband and cuffs use 1x1 rib knit with good elasticity recovery. No signs of premature stretching or deformation.
Zippers: YKK zippers on full-zip models operate smoothly without catching. Pull tabs are securely attached.

Graphic Print Quality

The collection's defining feature is the screen-printed graphics, which require careful examination:

Registration: Multi-color prints show proper registration with minimal bleeding between colors.
Curing: Prints pass the scratch test with no significant ink transfer, indicating proper curing.
Detail Preservation: Fine details in the "Saint Tears" logo and accompanying graphics maintain clarity without pixelation.
Placement: Chest prints are consistently positioned 8-10cm below the collar seam across all sizes.

Sizing and Fit Verification

Measurements correspond to the provided size chart within acceptable tolerances:

Chest: Actual measurements within ±2cm of stated size
Length: Back length consistent across production batch
Sleeves: Raglan sleeve construction maintains proper drape

All hoodies include drawstrings with metal aglets, kangaroo pockets with reinforced stitching, and properly aligned hood construction. No significant color bleeding observed during preliminary wash test.

Check current price & stock

QC Inspection 1 - Saint Tears Graphic Hoodies Collection

QC Inspection 2 - Saint Tears Graphic Hoodies Collection

QC Inspection 3 - Saint Tears Graphic Hoodies Collection

QC Inspection 4 - Saint Tears Graphic Hoodies Collection

How to Inspect Saint Tears Hoodies QC Photos

When viewing Quality Control (QC) photos for the Saint Tears Hoodies, pay close attention to the following details:

1. Inspect Graphic Print Quality

Examine all printed graphics under good lighting. Check for proper color registration, crisp edges without bleeding, and consistent opacity. Perform a scratch test on inconspicuous areas to verify proper ink curing. Ensure no cracking or peeling when gently stretching the print area.

2. Verify Stitching and Seams

Check all seams including shoulders, sides, sleeves, and hood attachment. Look for consistent stitch density (12-14 SPI), proper thread tension without puckering, and secure bar tacks at stress points. Inspect for any skipped stitches, loose threads, or uneven seam allowances.

3. Assemble Material and Construction

Evaluate fabric weight and hand feel. Verify the 80/20 cotton-polyester blend by checking care labels and performing a burn test on loose threads if possible. Check ribbing elasticity at cuffs and waistband. Ensure zippers operate smoothly and all hardware (aglets, drawstring ends) is securely attached.

4. Confirm Sizing and Measurements

Lay the hoodie flat and measure chest width (armpit to armpit), back length (collar seam to bottom), and sleeve length. Compare against the provided size chart with ±2cm tolerance. Check for consistent sizing across the same labeled size. Verify hood proportions and pocket placement alignment.