PRADA Logo Shorts QC Photos

Viewing 7 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Report: White PRADA Logo Shorts with Black Stripes

This inspection report provides a detailed analysis of the White PRADA Logo Shorts with Black Stripes. The item was examined for construction quality, material accuracy, logo application, and overall finish to determine if it meets acceptable standards for streetwear enthusiasts.

Overall Assessment

The shorts demonstrate satisfactory construction with some minor inconsistencies typical of mid-tier replicas. The primary materials feel appropriate for athletic shorts, though there are noticeable variations in logo execution and stripe alignment that warrant attention.

Detailed Findings

Logo Application: The PRADA logo on the left leg shows proper placement but exhibits slight ink bleeding along the edges. The font weight appears accurate when compared to authentic references.
Stripes Alignment: Black stripes show consistent spacing but minor waviness on the rear panel. This is most visible under direct lighting but not immediately noticeable during normal wear.
Stitching Quality: Double-needle construction is present throughout with generally even stitch spacing. However, two small thread tails (approximately 3mm each) were found near the waistband drawstring channels.
Material & Finish: The white polyester fabric has appropriate weight and drape. No discoloration or staining was detected. The black stripes show good color saturation without fading.
Hardware & Details: Drawstring ends are properly finished with metal aglets that match authentic specifications. The interior care label shows correct font but slightly misaligned printing.

Flaw Summary

Major flaws: None detected. Minor flaws: Logo ink bleeding, rear stripe waviness, and minor stitching imperfections. These issues are common in this price range and unlikely to be noticeable during casual wear. The item represents a solid option for those seeking the PRADA aesthetic without premium construction.

Check current price & stock

How to Inspect PRADA Logo Shorts QC Photos

When viewing Quality Control (QC) photos for the PRADA Logo Shorts, pay close attention to the following details:

1. Inspect Logo Application

Examine the PRADA logo under good lighting. Check for crisp edges without ink bleeding or smudging. Compare font thickness and spacing against authentic reference images. Ensure the logo is centered properly on the left leg panel.

2. Check Stripe Alignment

Lay the shorts flat and examine the black stripes from multiple angles. Look for consistent spacing and parallel alignment. Pay special attention to the rear panel where stripes may show waviness or inconsistent thickness.

3. Evaluate Stitching Quality

Inspect all seams for consistent stitch spacing and tension. Check for loose threads, especially near the waistband and drawstring channels. Verify that double-needle construction is present on major seams for durability.

4. Verify Materials & Hardware

Feel the fabric weight and texture against authentic references. Check drawstring aglets for proper metal finish and secure attachment. Examine interior labels for correct font, content, and printing alignment.