Polo T-Shirt 67 Number Design QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Polo T-Shirt 67 Number Design Quality Control Report

This comprehensive QC report evaluates the Polo T-Shirt 67 Number Design across available color variants. The item features a classic polo shirt construction with a prominent "67" number design on the chest, available in multiple color combinations.

Materials and Construction

The fabric appears to be a standard cotton-polyester blend typical of streetwear polo shirts. Weight and texture are consistent across all color samples inspected. The collar maintains proper structure without excessive stiffness or floppiness. Ribbed cuffs and hem show uniform elasticity with no visible defects in the ribbing pattern.

Print Quality Assessment

The "67" number design exhibits clean, crisp edges with no bleeding or fading observed. Color saturation matches reference images across all variants. Screen printing shows proper adhesion with no cracking or peeling at stress points. The print placement is consistently centered 2-3 inches below the collar seam across all sizes.

Stitching and Finishing

Collar stitching shows uniform 12-14 stitches per inch with no loose threads
Shoulder seams are properly aligned with no puckering
Side seams feature flatlock construction for comfort
Button placket shows reinforced stitching at stress points
Hem stitching is consistent with proper tension throughout

Sizing and Measurements

All samples fall within acceptable tolerance ranges (±1cm). Chest measurements correspond accurately to size charts. Length proportions maintain the intended slightly oversized streetwear fit. Color consistency between different production runs shows minimal variation.

Overall Assessment

This batch demonstrates good manufacturing quality with attention to detail in construction and printing. Minor variations in color saturation between different colorways fall within acceptable limits. The item meets streetwear quality standards for materials, construction, and design execution.

Check current price & stock

QC Inspection 1 - Polo T-Shirt 67 Number Design in Multiple Colors

QC Inspection 2 - Polo T-Shirt 67 Number Design in Multiple Colors

QC Inspection 3 - Polo T-Shirt 67 Number Design in Multiple Colors

QC Inspection 4 - Polo T-Shirt 67 Number Design in Multiple Colors

How to Inspect Polo T-Shirt 67 Number Design QC Photos

When viewing Quality Control (QC) photos for the Polo T-Shirt 67 Number Design, pay close attention to the following details:

1. Inspect Print Alignment

Verify the "67" number design is centered horizontally and positioned 2-3 inches below the collar seam. Check that the print is straight and not skewed. Compare alignment across multiple color variants.

2. Check Stitching Quality

Examine all seams for consistent stitch density (12-14 stitches per inch). Look for loose threads, skipped stitches, or tension issues. Pay special attention to collar attachment, shoulder seams, and button placket reinforcement.

3. Assemble Fabric and Color

Feel the fabric weight and texture for consistency. Check color saturation matches reference images. Look for dye inconsistencies, stains, or discoloration. Verify ribbed cuffs maintain proper elasticity without deformation.

4. Verify Sizing Accuracy

Measure chest width, shoulder width, and length against provided size charts. Check that measurements fall within ±1cm tolerance. Ensure proportions maintain the intended oversized fit. Compare measurements across different color variants.