Logo Print T-Shirt & Shorts Set QC

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Inspection Report: Men's Logo Print T-Shirt & Shorts Set - White/Black

This comprehensive QC report evaluates the two-piece Logo Print Set consisting of a matching t-shirt and shorts in the White/Black colorway. The inspection focuses on construction quality, print application, fabric integrity, and overall consistency between pieces.

Construction & Stitching

The set demonstrates adequate construction with reinforced seams at stress points. The t-shirt features:

Double-stitched shoulder seams and side seams
Neck ribbing with consistent tension and no twisting
Hem stitching with even spacing and no loose threads

The shorts include:

Elastic waistband with secure stitching
Side seams aligned properly with no puckering
Hem finishing consistent around both leg openings

Print Quality & Application

The logo print requires careful examination:

Print alignment centered on both t-shirt chest and shorts thigh
Ink opacity consistent with no fading or bleeding
Print edges crisp without cracking upon fabric stretch
Color saturation matches between both pieces

The white/black contrast should show sharp definition with no color transfer between sections.

Fabric & Materials

Both pieces utilize 100% cotton jersey fabric with:

Consistent weight and thickness between t-shirt and shorts
Proper pre-shrinking with minimal residual shrinkage
Even dye application with no streaks or discoloration
Fabric grain aligned correctly with pattern pieces

Sizing & Fit Consistency

The set must maintain proportional sizing:

T-shirt and shorts labeled size matches actual measurements
Both pieces from same production batch for color consistency
Elastic recovery in waistband maintains tension after stretching
Overall dimensions within tolerance of size specifications

Final assessment confirms this Logo Print Set meets acceptable quality standards for construction, print application, and material consistency between matching pieces.

Check current price & stock

How to Inspect Logo Print T-Shirt & Shorts Set QC QC Photos

When viewing Quality Control (QC) photos for the Logo Print T-Shirt & Shorts Set QC, pay close attention to the following details:

1. Inspect Print Alignment

Verify the logo print is centered on both the t-shirt chest and shorts thigh. Check for proper registration with no off-center placement. Examine print edges for crisp definition without bleeding into fabric fibers.

2. Check Seam Construction

Examine all seams for consistent stitching tension and reinforcement at stress points. Pay special attention to shoulder seams, neck ribbing, and elastic waistband attachment. Look for loose threads, skipped stitches, or puckering.

3. Verify Fabric Consistency

Compare fabric weight, texture, and color between the t-shirt and shorts. Ensure both pieces use identical material with consistent dye application. Check for any pilling, snags, or manufacturing defects in the jersey fabric.

4. Measure Sizing Accuracy

Take flat measurements of chest width, shoulder width, t-shirt length, shorts waist, inseam, and outseam. Compare against size specifications to ensure both pieces are proportionally sized as a matching set.