Black Compression T-Shirt QC Photos

Viewing 6 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Inspection Report: Black Compression T-Shirt

This comprehensive QC report evaluates the Black Compression T-Shirt for men, focusing on construction quality, material integrity, and overall craftsmanship. The inspection was conducted under proper lighting conditions with the garment laid flat and measurements taken at key points.

Material and Fabric Quality

The compression fabric shows excellent elasticity recovery when stretched and returns to its original shape without permanent deformation. The polyester-spandex blend (typically 85/15 or 90/10) provides the necessary compression while maintaining breathability. No pilling, snags, or fabric defects were observed. The material thickness is consistent throughout, with no thin spots or irregularities in the knit pattern.

Construction and Stitching

Flatlock seams are properly executed with consistent stitch density (approximately 12-14 stitches per inch)
No loose threads or skipped stitches visible at seam intersections
Hem stitching is straight and even around the entire circumference
Neckline binding shows proper tension without puckering or stretching
Sleeve attachments are symmetrical with reinforced stitching at stress points

Fit and Sizing Accuracy

Measurements correspond accurately to the labeled size chart. Chest measurement is within ±1cm of specification, length is consistent, and sleeve length matches the stated dimensions. The compression level is appropriate for athletic use - providing support without restricting movement or circulation.

Finishing Details

Care label is properly attached with correct washing instructions
Brand logo (if present) is centered and properly heat-pressed/stitched
No dye transfer or color bleeding observed during moisture test
Odor test reveals no chemical smells - only mild factory scent
Packaging is intact with no signs of previous wear or damage

Overall Rating: PASS - This Black Compression T-Shirt meets quality standards for materials, construction, and sizing accuracy.

Check current price & stock

QC Inspection 1 - Black Compression T-Shirt for Men

QC Inspection 2 - Black Compression T-Shirt for Men

QC Inspection 3 - Black Compression T-Shirt for Men

QC Inspection 4 - Black Compression T-Shirt for Men

QC Inspection 5 - Black Compression T-Shirt for Men

QC Inspection 6 - Black Compression T-Shirt for Men

How to Inspect Black Compression T-Shirt QC Photos

When viewing Quality Control (QC) photos for the Black Compression T-Shirt, pay close attention to the following details:

1. Check Fabric Elasticity

Stretch the material in multiple directions to test recovery. Proper compression fabric should return to original shape immediately without permanent stretching. Check for consistent thickness and no pilling or snags.

2. Inspect Seam Construction

Examine all flatlock seams under good lighting. Look for consistent stitch density (12-14 stitches per inch), no loose threads, and properly finished seam ends. Pay special attention to sleeve attachments and side seams.

3. Verify Sizing Accuracy

Measure chest width, garment length, and sleeve length. Compare against the size chart with tolerance of ±1cm. Ensure the compression level is appropriate - not too loose or restrictive.

4. Examine Finishing Details

Check logo placement (if present) for centering and proper application. Inspect hem stitching for consistency. Verify care label attachment and information. Test for color bleeding with damp cloth.