Patterned Button-Up Shirt QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Patterned Long Sleeve Button-Up Shirt Quality Control Report

This comprehensive QC analysis examines a men's patterned long sleeve button-up shirt, focusing on construction, materials, and finishing details that determine overall quality and value.

Fabric & Pattern Inspection

The primary fabric should be examined for weight, texture consistency, and pattern alignment. Check that the pattern matches perfectly at all seams, particularly at the shoulders, sleeves, and side panels. The fabric should have minimal pilling, no visible stains, and consistent dye saturation throughout. Verify that the pattern repeat is uniform across the entire garment with no abrupt cuts or misalignments at critical points.

Construction & Stitching

All seams must be inspected for:

Consistent stitch length (typically 10-12 stitches per inch)
Secure back-tacking at stress points (armholes, collar, placket)
No loose threads or skipped stitches
Flat-felled seams on shoulders and side panels for durability
Clean finishing on interior seams with no raw edges

The collar should lay flat without bubbling, with crisp points and even topstitching. The placket must be perfectly aligned with buttonholes centered and reinforced.

Hardware & Finishing Details

All buttons should be securely attached with proper shank length, matching in color and material. Buttonholes must be cleanly cut with reinforced bartacking at both ends. Check that the cuffs have functional buttons with consistent spacing. The hem should be even around the entire bottom, with no puckering or unevenness. Interior labels should be properly attached with correct care instructions.

Fit & Measurements

Compare actual measurements against size chart specifications for:

Chest (pit-to-pit measurement)
Shoulder width
Sleeve length from shoulder seam
Shirt length from collar seam
Cuff circumference

All measurements should be within ±1cm tolerance. The shirt should hang symmetrically when buttoned, with equal front and back lengths.

Check current price & stock

QC Inspection 1 - Patterned Long Sleeve Button-Up Shirt for Men

QC Inspection 2 - Patterned Long Sleeve Button-Up Shirt for Men

QC Inspection 3 - Patterned Long Sleeve Button-Up Shirt for Men

QC Inspection 4 - Patterned Long Sleeve Button-Up Shirt for Men

How to Inspect Patterned Button-Up Shirt QC Photos

When viewing Quality Control (QC) photos for the Patterned Button-Up Shirt, pay close attention to the following details:

1. Pattern Alignment Check

Lay the shirt flat and verify pattern matches perfectly at all major seams including shoulders, side panels, and sleeves. Check that horizontal patterns are level and vertical patterns align at center front and back.

2. Stitch Quality Inspection

Examine all seams for consistent stitch length (10-12 stitches per inch), secure back-tacking at stress points, and no loose threads. Pay special attention to collar construction, armholes, and placket where stitching defects are most common.

3. Hardware Verification

Test all buttons for secure attachment with proper shank length. Inspect buttonholes for clean cutting and reinforced bartacking. Ensure cuff buttons function properly and all hardware matches in color and material.

4. Measurement Comparison

Take precise pit-to-pit, shoulder width, sleeve length, and shirt length measurements. Compare against provided size chart with ±1cm tolerance. Check for symmetrical construction by comparing left and right sides.