Glow-in-the-Dark Vending Machine Tee QC

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Report: Glow-in-the-Dark Vending Machine Long Sleeve Tee

This detailed inspection report covers the Glow-in-the-Dark Vending Machine Long Sleeve Tee, focusing on critical quality aspects including glow functionality, print integrity, construction, and sizing accuracy.

Glow-in-the-Dark Feature Inspection

The primary feature requires thorough testing. After exposing the tee to light for 5 minutes, the glow effect should be:

Uniform across all printed areas without dark spots
Bright enough to be visible in low-light conditions
Consistent duration (minimum 30 minutes of visible glow)
No bleeding or smudging of glow pigment

Print Quality Assessment

The vending machine graphic must meet these standards:

Sharp, crisp edges with no pixelation or blurring
Proper color saturation matching reference images
Centered placement with equal margins on both sides
No cracking, peeling, or fading after stretch test
Screen print thickness consistent throughout design

Construction & Materials

General build quality examination reveals:

Double-stitched seams at shoulders and sides for durability
Even hem with no puckering or unevenness
Neck ribbing maintains shape after stretching
100% cotton fabric weight matches specifications (approx. 220gsm)
No loose threads or skipped stitches

Sizing & Fit Verification

Measurements taken flat:

Chest: 52cm (size M) - within 1cm tolerance
Length: 70cm (size M) - within 1cm tolerance
Sleeve length: 64cm - consistent both sides
Neck opening: 20cm - proper stretch recovery

Overall assessment: This tee meets quality standards if glow function works properly and print alignment is correct. Minor variations in glow intensity may occur between batches.

Check current price & stock

QC Inspection 1 - Glow-in-the-Dark Vending Machine Long Sleeve Tee

QC Inspection 2 - Glow-in-the-Dark Vending Machine Long Sleeve Tee

QC Inspection 3 - Glow-in-the-Dark Vending Machine Long Sleeve Tee

QC Inspection 4 - Glow-in-the-Dark Vending Machine Long Sleeve Tee

How to Inspect Glow-in-the-Dark Vending Machine Tee QC QC Photos

When viewing Quality Control (QC) photos for the Glow-in-the-Dark Vending Machine Tee QC, pay close attention to the following details:

1. Test Glow Function

Expose tee to direct light for 5 minutes, then move to dark room. Check for uniform brightness across all printed areas, no dark spots, and minimum 30-minute glow duration. Verify glow pigment doesn't bleed into fabric.

2. Inspect Print Alignment

Lay tee flat on surface. Measure margins from side seams to print edges - should be equal within 0.5cm. Check that vending machine graphic is centered horizontally and vertically. Look for pixelation or blurring at edges.

3. Check Stitching Quality

Examine all seams: shoulders, sides, sleeves, and hem. Shoulder and side seams must be double-stitched. Look for consistent stitch spacing, no skipped stitches, and proper thread tension. Check for loose threads at seam ends.

4. Verify Sizing Accuracy

Measure flat: chest (armpit to armpit), length (shoulder to hem), sleeve length (shoulder seam to cuff). Compare to size chart with 1cm tolerance. Check neck opening stretches properly and returns to shape. Ensure both sleeves are equal length.