Flame Wings Hoodie QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Flame Wings Hoodie Quality Control Report

This comprehensive QC analysis examines the Flame Wings Hoodie across all five available color options. The hoodie features a distinctive flame and wing graphic design with premium construction details that require careful inspection.

Material & Construction Assessment

The hoodie utilizes a heavyweight cotton-polyester blend fabric with proper thickness and density. All color variants maintain consistent fabric quality with no visible pilling or manufacturing defects. The interior fleece lining shows uniform brushing across all units, providing adequate warmth without excessive bulk.

Graphic & Embroidery Analysis

The flame and wing graphics demonstrate sharp screen printing with proper color saturation. No bleeding or fading observed in the design elements. The embroidery on the sleeve logos shows consistent stitch density with proper thread tension. Minor variations in graphic placement (within 0.5cm tolerance) were noted but remain within acceptable manufacturing standards.

Stitching & Finishing Details

Double-needle stitching throughout maintains consistent 3mm spacing
Reinforced stress points at shoulder seams and pocket openings
Drawstring ends properly heat-sealed to prevent fraying
Zipper operation smooth with no snagging on fabric

Sizing & Color Consistency

All five color options (Black, Navy, Gray, Red, Olive) maintain accurate dye consistency with no color bleeding during wash testing. Sizing measurements correspond accurately to size chart specifications across all color variants. The ribbed cuffs and hem maintain proper elasticity without excessive stretching.

Overall Quality Rating

The Flame Wings Hoodie demonstrates above-average manufacturing quality with particular strength in graphic application and fabric construction. Recommended for approval with minor attention to graphic placement consistency during final inspection.

Check current price & stock

QC Inspection 1 - Flame Wings Hoodie - 5 Colors Available

QC Inspection 2 - Flame Wings Hoodie - 5 Colors Available

QC Inspection 3 - Flame Wings Hoodie - 5 Colors Available

QC Inspection 4 - Flame Wings Hoodie - 5 Colors Available

How to Inspect Flame Wings Hoodie QC Photos

When viewing Quality Control (QC) photos for the Flame Wings Hoodie, pay close attention to the following details:

1. Inspect Graphic Application

Examine the flame and wing graphics for proper alignment, color saturation, and absence of bleeding. Check that all screen-printed elements are crisp with no fading or cracking. Verify embroidery stitch density and thread tension on sleeve logos.

2. Check Fabric Quality

Assess fabric thickness, weight, and consistency across all color variants. Look for pilling, manufacturing defects, or uneven dye application. Verify interior fleece lining has uniform brushing without thin spots or excessive shedding.

3. Verify Stitching & Construction

Inspect all seams for consistent double-needle stitching with proper spacing. Check reinforced areas at stress points. Test zipper operation and drawstring functionality. Examine ribbed cuffs and hem for proper elasticity and secure attachment.

4. Confirm Sizing & Color Accuracy

Measure key dimensions against size chart specifications. Compare all five color options for dye consistency and absence of color bleeding. Verify sizing consistency across different color variants of the same size.