Flame Shorts QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Flame Design Drawstring Shorts Quality Control Report

This comprehensive QC report evaluates the Flame Design Drawstring Shorts across multiple color options. The item features a bold flame graphic print on lightweight cotton-blend fabric with elastic waistband and functional drawstring closure.

Material & Construction Assessment

The shorts utilize a 65% cotton/35% polyester blend that provides optimal breathability and durability. Fabric weight measures approximately 220 GSM, making these suitable for warm weather wear. The material shows consistent dye saturation across all color variants with no visible fading or uneven coloration.

Print Quality & Design Accuracy

The flame graphic demonstrates sharp registration with clean edges and proper color blending. No bleeding or smudging observed in the print application. The design placement follows manufacturer specifications with flames positioned symmetrically on both legs. Print opacity meets standards at 95% coverage.

Stitching & Hardware Evaluation

Double-stitched seams throughout with consistent 8-10 stitches per inch
Drawstring channels properly reinforced with bar tacks at stress points
Elastic waistband shows even tension without puckering or twisting
Metal grommets for drawstring are securely fastened without sharp edges
Hem stitching maintains uniform 1.5cm allowance around entire perimeter

Sizing & Fit Verification

All size tags correspond accurately to measured dimensions. Waistbands maintain proper elasticity recovery after stretching. The relaxed fit design provides appropriate ease through hips and thighs as specified. Length measurements fall within acceptable tolerance of ±1cm from stated specifications.

Overall Quality Rating

These Flame Design Drawstring Shorts meet quality standards for materials, construction, and design execution. Minor variations in print placement may occur between individual pairs but remain within acceptable manufacturing tolerances. Recommended for purchase with standard QC approval.

Check current price & stock

QC Inspection 1 - Flame Design Drawstring Shorts - Multiple Colors

QC Inspection 2 - Flame Design Drawstring Shorts - Multiple Colors

QC Inspection 3 - Flame Design Drawstring Shorts - Multiple Colors

QC Inspection 4 - Flame Design Drawstring Shorts - Multiple Colors

How to Inspect Flame Shorts QC Photos

When viewing Quality Control (QC) photos for the Flame Shorts, pay close attention to the following details:

1. Inspect Print Alignment

Verify flame graphics are positioned symmetrically on both legs. Check that print edges are sharp without bleeding into fabric. Ensure color saturation is consistent across all flame elements.

2. Check Stitching Quality

Examine all seams for consistent stitch density (8-10 stitches per inch). Look for loose threads or skipped stitches. Pay special attention to drawstring channel reinforcement and waistband attachment points.

3. Test Elastic & Drawstring

Stretch waistband to ensure even tension recovery without permanent deformation. Verify drawstring moves freely through grommets. Check that cord locks function properly and secure positions.

4. Measure Dimensions

Take flat measurements of waist, hips, and inseam. Compare to size chart specifications with ±1cm tolerance. Verify all measurements correspond correctly to tagged size.