Ripped Distressed Denim QC Report

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Inspection Report: Ripped Distressed Denim Jeans with Patches and Logos

This comprehensive QC report evaluates the construction, materials, and finishing details of men's ripped distressed denim jeans featuring patchwork and logo elements. The inspection focuses on critical quality indicators for premium streetwear denim.

Fabric and Material Assessment

The denim fabric exhibits appropriate weight and texture for distressed jeans. The distressing techniques including rips, fraying, and abrasions appear intentionally placed and consistent with the design aesthetic. No unexpected tears or weak points were detected in high-stress areas such as knees and seat. The fabric maintains structural integrity despite the distressed elements.

Construction and Stitching Analysis

All major seams demonstrate consistent stitching with proper thread tension. Key construction points were examined:

Side seams show straight, even stitching without puckering
Inseams maintain consistent 1/2-inch seam allowance throughout
Waistband stitching is secure with no loose threads
Back yoke construction shows proper alignment

The bar tacks at stress points (pocket corners, belt loops) are properly executed with reinforced stitching.

Patch and Logo Application

All applied patches exhibit secure attachment with appropriate stitching methods. No loose edges or peeling was observed. Logo placements match the specified design layout with proper positioning on back pockets and thigh areas. Embroidery on patches shows clean execution with no thread breaks or misaligned elements.

Hardware and Finishing Details

The metal hardware (zipper, button, rivets) functions properly with smooth operation. The zipper pull shows secure attachment, and all rivets are properly set without sharp edges. The wash treatment produces consistent fading throughout the garment with no uneven discoloration. The hem finishing is clean with appropriate stitch density.

Overall Quality Assessment

This pair meets quality standards for distressed denim construction. The intentional distressing appears carefully executed rather than haphazard, and all functional elements perform as expected. Minor variations in distressing patterns are acceptable within the design parameters of artisanal denim finishes.

Check current price & stock

QC Inspection 1 - Ripped Distressed Denim Jeans for Men with Patches and Logos

QC Inspection 2 - Ripped Distressed Denim Jeans for Men with Patches and Logos

QC Inspection 3 - Ripped Distressed Denim Jeans for Men with Patches and Logos

QC Inspection 4 - Ripped Distressed Denim Jeans for Men with Patches and Logos

How to Inspect Ripped Distressed Denim QC Report QC Photos

When viewing Quality Control (QC) photos for the Ripped Distressed Denim QC Report, pay close attention to the following details:

1. Inspect Distressing Quality

Examine all ripped and distressed areas for consistency and intentional placement. Check that fraying appears natural and no unexpected tears exist in non-designated areas. Verify distressing doesn't compromise structural integrity at stress points like knees and seat.

2. Check Patch Application

Inspect all patches for secure attachment with proper stitching around all edges. Verify no loose threads or peeling edges. Check that patch positioning matches specified design layout and that any embroidery on patches is clean without thread breaks.

3. Assemble Stitching Integrity

Examine all major seams (side seams, inseams, waistband) for consistent stitching with proper tension. Check bar tacks at stress points (pocket corners, belt loops) for reinforcement. Look for any skipped stitches or loose threads throughout the construction.

4. Verify Hardware Function

Test all hardware functionality including zipper operation and button closure. Check that rivets are properly set without sharp edges. Ensure zipper pull is securely attached and all metal components show consistent finish without discoloration or defects.