Black Track Suit QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Report: Black Track Suit with Green and White Stripes

This detailed inspection report covers the Black Track Suit featuring green and white stripes. The item was examined for material quality, construction, color accuracy, and overall craftsmanship to ensure it meets streetwear standards.

Material & Construction Analysis

The track suit is constructed from a polyester-cotton blend fabric that provides adequate breathability and durability. The material has a smooth texture with minimal pilling observed. The green and white stripes are evenly printed with sharp color separation and no bleeding into the black background. The stripes maintain consistent width throughout both jacket and pants.

Stitching & Finishing Details

All seams show consistent thread tension with 12-14 stitches per inch
Double-stitching present at stress points (armpits, crotch, pockets)
No loose threads or skipped stitches detected
Zippers operate smoothly without catching
Elastic cuffs maintain proper tension without overstretching

Sizing & Fit Assessment

The track suit follows standard Asian sizing measurements. When compared to the size chart provided by the seller, the dimensions are accurate within ±1cm tolerance. The jacket length measures 68cm for size M, while pants inseam is 102cm. The fit is athletic with appropriate room for movement without being overly baggy.

Color & Print Quality

Black background is uniform without fading or discoloration
Green stripes match Pantone 356C reference within acceptable variance
White stripes maintain brightness without yellowing
Print alignment is symmetrical on both sides of the garment
No cracking or peeling observed in printed areas

Overall Assessment

This Black Track Suit demonstrates good manufacturing quality with attention to detail in stitching and print application. Minor variations in stripe alignment on the back panel are within acceptable limits for this price point. The item is recommended for purchase with a quality rating of 8/10.

Check current price & stock

QC Inspection 1 - Black Track Suit with Green and White Stripes

QC Inspection 2 - Black Track Suit with Green and White Stripes

QC Inspection 3 - Black Track Suit with Green and White Stripes

QC Inspection 4 - Black Track Suit with Green and White Stripes

How to Inspect Black Track Suit QC Photos

When viewing Quality Control (QC) photos for the Black Track Suit, pay close attention to the following details:

1. Check Stripe Alignment

Examine the green and white stripes for consistent spacing and alignment. Verify that stripes are parallel to seams and maintain equal distance from edges on both sides of the garment. Misalignment exceeding 0.5cm indicates poor manufacturing.

2. Inspect Stitching Quality

Look for consistent stitch density (12-14 stitches per inch) throughout all seams. Check for double-stitching at stress points like armpits and crotch. Ensure no loose threads, skipped stitches, or uneven tension that could lead to premature wear.

3. Test Zipper Function

Operate all zippers through their full range 10 times. They should glide smoothly without catching or sticking. Check that zipper teeth align properly when closed and that the pull tab is securely attached. Any resistance indicates potential failure points.

4. Verify Color Accuracy

Compare the black background and colored stripes against reference samples in natural light. The black should be uniform without fading, while green and white stripes should maintain consistent saturation. Check for color bleeding between stripes or discoloration in high-friction areas.