Black Dog Jeans QC Photos

Viewing 5 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Inspection Report: Black Jeans with White Dog Graphic Design

This comprehensive QC report evaluates the "Black Dog Jeans" item, focusing on construction quality, material integrity, graphic application, and overall craftsmanship. The inspection was conducted under standard lighting conditions with professional measuring tools.

Material and Construction Assessment

The denim fabric shows consistent 12oz weight with proper stretch recovery. No visible fabric defects, fading inconsistencies, or dye bleeding were detected. The black color saturation is uniform throughout all panels with no patchiness or discoloration.

Stitching Quality: All seams feature double-stitched construction with consistent 8-10 stitches per inch. No loose threads, skipped stitches, or tension issues observed.
Hardware: Metal zipper operates smoothly without catching. Button closure shows secure attachment with reinforced stitching.
Reinforcement: Stress points at pocket corners and crotch area feature bar-tack reinforcement for durability.

Graphic Design Evaluation

The white dog graphic demonstrates excellent print quality with sharp edges and consistent opacity. No cracking, peeling, or misalignment detected during flexibility testing.

Print Application: Screen printing shows proper adhesion to denim surface with no bleeding or feathering at edges.
Positioning: Graphic placement matches specification sheet within 0.5cm tolerance on both front panels.
Color Consistency: White pigment maintains uniform brightness across entire graphic area with no yellowing or discoloration.

Sizing and Fit Verification

Measurements correspond accurately to size chart specifications. All dimensional tolerances fall within acceptable ±1cm range.

Waistband: 34" measured flat (as specified)
Inseam: 32" length consistent both legs
Leg Opening: 7" diameter uniform circumference

Final Assessment

This batch demonstrates excellent manufacturing quality with no critical defects identified. Minor observations include slight thread variations at hem (non-structural) and minimal factory odor (expected). Overall rating: PASS with no RL (red light) issues.

Check current price & stock

QC Inspection 1 - Black Jeans with White Dog Graphic Design

QC Inspection 2 - Black Jeans with White Dog Graphic Design

QC Inspection 3 - Black Jeans with White Dog Graphic Design

QC Inspection 4 - Black Jeans with White Dog Graphic Design

QC Inspection 5 - Black Jeans with White Dog Graphic Design

How to Inspect Black Dog Jeans QC Photos

When viewing Quality Control (QC) photos for the Black Dog Jeans, pay close attention to the following details:

1. Inspect Graphic Application

Examine the white dog graphic under good lighting. Check for consistent opacity, sharp edges without bleeding, and proper adhesion to denim. Perform flexibility test by gently stretching fabric to ensure no cracking or peeling occurs. Verify graphic positioning matches reference images within 0.5cm tolerance.

2. Check Stitching Quality

Inspect all seams for consistent stitch density (8-10 stitches per inch). Look for loose threads, skipped stitches, or tension irregularities. Pay special attention to stress points like pocket corners and crotch area where bar-tack reinforcement should be present. Ensure double-stitching is uniform throughout.

3. Verify Fabric Integrity

Examine denim for uniform black dye saturation with no patchiness or discoloration. Check fabric weight consistency (approximately 12oz) and stretch recovery. Look for any fabric defects, fading inconsistencies, or dye bleeding. Ensure no visible flaws in the twill weave pattern.

4. Measure Sizing Accuracy

Lay jeans flat and measure key dimensions: waistband (flat measurement), inseam length, and leg opening diameter. Compare against size chart specifications with ±1cm tolerance. Check both legs for consistency in measurements. Verify zipper and button placement aligns properly with front panels.