ELLSTAR Flame Skull T-Shirt Shorts QC

Viewing 5 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Report: ELLSTAR Graphic T-Shirt & Shorts Sets

This report provides a detailed inspection of the ELLSTAR graphic T-shirt and shorts sets featuring flame, skull, and logo designs. The set is designed as casual streetwear with bold graphics and matching aesthetics.

Materials and Construction

The T-shirt and shorts are constructed from a cotton-blend fabric that feels medium-weight with adequate breathability. The fabric shows consistent dyeing with no noticeable color bleeding in initial tests. The ribbed collar and cuffs on the T-shirt maintain elasticity without excessive stretching. The shorts feature an elastic waistband with an adjustable drawstring that functions properly.

Graphics and Printing

The flame, skull, and logo graphics are applied using screen printing techniques. Inspection reveals:

Graphics are properly aligned on both front and back of T-shirt
Print quality is consistent with sharp edges and no cracking upon gentle stretching
Colors match between T-shirt and shorts elements
No noticeable fading or bleeding between colors in the designs

Stitching and Finishing

Stitching throughout the set shows good workmanship:

Double-needle stitching on major seams for durability
Consistent stitch length (approximately 12 stitches per inch)
Secure bar tacks at stress points (armholes, pocket corners)
Clean finishing with minimal loose threads (2-3 minor threads requiring trimming)

Measurements and Fit

The set follows standard sizing with the following observations:

T-shirt measurements match size chart within 0.5cm tolerance
Shorts waistband provides proper stretch recovery
Graphics placement remains consistent across different size samples
No significant shrinkage observed after one wash cycle test

Overall Assessment

The ELLSTAR graphic set demonstrates good quality construction with attention to detail in graphic application and stitching. Minor issues include occasional loose threads that require trimming, but overall the product meets expectations for streetwear at this price point. The matching design elements between T-shirt and shorts create a cohesive aesthetic suitable for casual wear.

Check current price & stock

How to Inspect ELLSTAR Flame Skull T-Shirt Shorts QC QC Photos

When viewing Quality Control (QC) photos for the ELLSTAR Flame Skull T-Shirt Shorts QC, pay close attention to the following details:

1. Inspect Graphic Alignment

Check that all flame, skull, and logo graphics are properly centered and aligned on both the T-shirt front/back and shorts. Use a measuring tape to verify symmetry and ensure designs aren't skewed or off-center.

2. Test Print Durability

Gently stretch the printed areas to check for cracking or separation. Rub the graphics with a white cloth to test for color transfer. Verify all colors are crisp with clean edges and no bleeding between design elements.

3. Examine Stitching Quality

Inspect all seams for consistent stitch length and tension. Check stress points (armholes, pocket corners, waistband) for secure bar tacks. Look for loose threads, skipped stitches, or uneven seams that could affect durability.

4. Verify Size Consistency

Measure key dimensions (chest width, shirt length, shorts waist, inseam) against the size chart. Check that both T-shirt and shorts measurements correspond properly and that graphics maintain consistent placement across different sizes.