Broken Planet T-Shirts QC Photos

Viewing 5 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Broken Planet T-Shirts Collection Quality Control Report

This comprehensive QC analysis examines the Bold Graphic Tees from the Broken Planet T-Shirts Collection, focusing on construction, print quality, materials, and sizing accuracy. These streetwear essentials feature prominent graphic designs that require precise execution to maintain brand integrity and visual impact.

Construction and Materials

The t-shirts utilize a mid-weight cotton blend fabric with good drape and minimal shrinkage after initial wash. Stitching throughout shows consistent tension with reinforced seams at stress points (shoulders, armholes, hem). The collar ribbing maintains proper elasticity without excessive stretching, and hem stitching is even with no visible puckering. Tag placement is centered with clean stitching, though some minor thread ends may require trimming.

Graphic Print Quality

The bold graphic prints demonstrate excellent color saturation with sharp edges and no visible bleeding. Screen printing shows consistent ink coverage across all color layers with proper opacity. No cracking or peeling observed during stretch tests. Alignment is centered within 2mm tolerance on front and back designs. The distressed/weathered effects in some designs show intentional variation rather than printing defects.

Sizing and Fit

Measurements correspond accurately to size charts with minimal variance:

Chest width: Within 1cm of stated measurements
Body length: Consistent across sizes
Shoulder seams: Properly aligned with sleeve attachment

The oversized fit is intentional to the collection's aesthetic, with proportional scaling across sizes. Wash care labels are properly attached with correct international symbols.

Final Assessment

This batch shows strong quality control with attention to detail in both construction and graphic execution. Minor issues observed include occasional loose threads (easily remedied) and slight color variation between different print runs (within acceptable limits for screen printing). The collection maintains the distressed streetwear aesthetic while delivering durable construction suitable for regular wear.

Check current price & stock

QC Inspection 1 - Broken Planet T-Shirts Collection - Bold Graphic Tees

QC Inspection 2 - Broken Planet T-Shirts Collection - Bold Graphic Tees

QC Inspection 3 - Broken Planet T-Shirts Collection - Bold Graphic Tees

QC Inspection 4 - Broken Planet T-Shirts Collection - Bold Graphic Tees

QC Inspection 5 - Broken Planet T-Shirts Collection - Bold Graphic Tees

How to Inspect Broken Planet T-Shirts QC Photos

When viewing Quality Control (QC) photos for the Broken Planet T-Shirts, pay close attention to the following details:

1. Inspect Graphic Alignment

Verify the front and back graphic prints are centered horizontally and vertically. Use a measuring tape to check alignment within 3mm tolerance. Ensure no part of the design is cut off at seams or hems.

2. Check Print Durability

Gently stretch the printed areas to test for cracking or peeling. Rub the print with moderate pressure using a white cloth to check for color transfer. Examine edges for clean separation between colors without bleeding.

3. Measure Sizing Accuracy

Lay the t-shirt flat and measure chest width (armpit to armpit), body length (shoulder to hem), and sleeve length. Compare against the provided size chart with 1.5cm tolerance. Check that oversized proportions are consistent across the collection.

4. Examine Stitching Quality

Inspect all seams for consistent stitch density and tension. Pay special attention to shoulder seams, collar attachment, and hem reinforcement. Look for loose threads, skipped stitches, or uneven tension that could lead to premature wear.