Black Flame Sweatshorts QC Photos

Viewing 4 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Inspection Report: Black Flame Graphic Sweatshorts

This comprehensive QC report evaluates the Black Flame Graphic Sweatshorts with drawstring waist, focusing on construction, materials, and visual details. The item was inspected under proper lighting conditions with measurements verified against size charts.

Construction & Materials

The sweatshorts feature a standard cotton-polyester blend typical of streetwear bottoms, providing adequate comfort and durability. The fabric weight feels appropriate for the price point, though some batches may show slight variations in thickness. The drawstring waist functions properly with secure aglets and even distribution of tension.

Graphic & Print Quality

The flame graphic application shows good opacity with minimal cracking or fading. Key inspection points include:

Print alignment: The graphic should be centered on both front and back panels
Color consistency: Black tones should match between graphic and base fabric
Edge definition: Flame edges should be crisp without excessive bleeding

Minor variations in print placement (1-2cm) are acceptable within manufacturing tolerances.

Stitching & Finishing

All seams demonstrate consistent thread tension with proper reinforcement at stress points. The hem stitching shows even spacing without loose threads. The side pockets feature clean finishing with secure bar tacks at opening corners. The drawstring channel stitching runs parallel to the waistband without puckering.

Sizing & Fit Verification

Measurements should be compared against the provided size chart. Common discrepancies include:

Waist measurement variance: ±2cm acceptable
Inseam length consistency between legs
Leg opening symmetry

Always request actual measurements from your agent before GL approval.

Check current price & stock

QC Inspection 1 - Black Flame Graphic Sweatshorts with Drawstring Waist

QC Inspection 2 - Black Flame Graphic Sweatshorts with Drawstring Waist

QC Inspection 3 - Black Flame Graphic Sweatshorts with Drawstring Waist

QC Inspection 4 - Black Flame Graphic Sweatshorts with Drawstring Waist

How to Inspect Black Flame Sweatshorts QC Photos

When viewing Quality Control (QC) photos for the Black Flame Sweatshorts, pay close attention to the following details:

1. Inspect Graphic Alignment

Check that the flame graphic is properly centered on both front and back panels. Use the side seams as reference points. The graphic should be symmetrical with equal margins on left and right sides. Look for any tilting or distortion in the print application.

2. Verify Stitching Quality

Examine all seams for consistent thread tension and proper reinforcement. Pay special attention to stress points like pocket corners and drawstring openings. Check for loose threads, skipped stitches, or uneven hem lines. The waistband stitching should be straight and parallel to the edge.

3. Check Drawstring Function

Test the drawstring mechanism by pulling both ends evenly. Ensure the aglets are securely attached and the cord moves smoothly through the channel. Verify that the waistband gathers uniformly when tightened and that the knot stays secure. Look for any fraying or damage to the cord ends.

4. Measure Against Size Chart

Request actual measurements from your agent including waist (laid flat), inseam, leg opening, and total length. Compare these against the seller's size chart. Pay attention to leg symmetry by comparing left and right side measurements. Allow for ±2cm variance in waist measurements.