Balenciaga Fire Logo T-Shirt QC Photos

Viewing 5 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

Quality Control Report: Balenciaga Black T-Shirt with Fire Logo and Paint Splatter

This inspection covers a high-end streetwear replica of the Balenciaga Black T-Shirt featuring the signature Fire Logo and Paint Splatter design. The item was sourced from a reputable Weidian seller and evaluated against retail references for accuracy, construction, and material quality.

Overall Assessment

The shirt presents well with good weight and fabric drape. The black cotton jersey feels substantial, matching the heavyweight texture of authentic Balenciaga tees. However, several minor discrepancies were noted that place this in the mid-tier replica category.

Detailed Findings

Logo Accuracy: The Fire Logo embroidery shows clean execution with proper thread density. The flame details are sharp, though the gradient shading appears slightly less defined than retail. Placement on the chest is correct at 8cm from the collar.
Paint Splatter Pattern: The distressed paint splatter effect shows good randomization and color variation (white/gray tones). Some clusters appear slightly more concentrated than retail references, particularly on the back panel.
Construction: Double-needle stitching throughout with consistent tension. Shoulder seams are properly reinforced. The hem features the correct raw-edge finish with slight fraying characteristic of Balenciaga's distressed aesthetic.
Tags and Labels: The neck label shows accurate font and spacing. Wash care instructions are properly translated. The size tag (Medium) matches retail positioning.
Notable Flaws: Minor thread inconsistencies in two areas of the side seam. One paint splatter mark near the bottom hem shows slight bleeding beyond the intended boundary. The shirt's length measures 1.5cm shorter than retail specifications.

Recommendation

This is a wearable replica with good overall accuracy. The flaws are minor and not immediately noticeable during regular wear. For perfectionists, the length discrepancy and paint bleeding may be concerning. For the price point, this represents solid value with proper agent QC.

Check current price & stock

How to Inspect Balenciaga Fire Logo T-Shirt QC Photos

When viewing Quality Control (QC) photos for the Balenciaga Fire Logo T-Shirt, pay close attention to the following details:

1. Inspect Logo Embroidery

Examine the Fire Logo under good lighting. Check for clean, tight stitches without loose threads. Verify the flame gradient transitions smoothly from orange to yellow. Measure placement from collar seam (should be 8cm ±0.5cm).

2. Evaluate Paint Splatter Pattern

Compare paint splatter distribution against retail photos. Look for natural randomization without obvious repeating patterns. Check color accuracy (white/gray tones only, no off-colors). Inspect edges for bleeding or smudging beyond distressed areas.

3. Check Construction Quality

Feel fabric weight (should be heavy 280-300gsm cotton). Examine all seams for consistent double-needle stitching. Verify raw-edge hem has controlled fraying. Check shoulder reinforcement and side seam alignment.

4. Verify Tags and Measurements

Inspect neck label font accuracy and spacing. Confirm wash tag translations match retail. Measure shirt length, chest width, and sleeve length against size chart. Compare to retail specifications (typically longer, oversized fit).