AMIRI Drip Logo Sweatshirt QC Photos

Viewing 9 high-resolution inspection photos sourced from actual agent warehouses. Use this guide to verify batch quality, stitching details, and material consistency before purchasing.

Quality Analysis

Check current price & stock

AMIRI Drip Logo Black Sweatshirt Quality Control Report

This comprehensive QC report examines the AMIRI Drip Logo Black Sweatshirt, focusing on construction, materials, and accuracy compared to retail references. The item should exhibit premium craftsmanship consistent with AMIRI's streetwear aesthetic.

Materials and Construction

The sweatshirt should feature heavyweight French terry cotton with a soft, substantial hand feel. Check for consistent fabric density throughout - there should be no thin spots or irregularities in the knit. The interior should be brushed for comfort without excessive pilling. Ribbed cuffs and hem should maintain elasticity and return to shape after stretching.

Logo and Embroidery Details

The signature "Drip" logo embroidery requires careful inspection:

Thread color must match AMIRI's specific black-on-black gradient effect
Stitch density should be tight and uniform throughout the embroidery
Logo placement must be centered on the chest, approximately 2-3 inches below the neckline
No loose threads or skipped stitches in the embroidery
Backing material should be cleanly trimmed without visible residue

Stitching and Finishing

All seams should exhibit consistent stitch length (approximately 10-12 stitches per inch). Pay particular attention to:

Shoulder and side seams - should lie flat without puckering
Sleeve attachment points - reinforced stitching should be present
Neck ribbing - should be evenly attached with no gaps or stretching
Hem stitching - should be straight and parallel to the edge

Sizing and Fit Verification

Compare measurements against the provided size chart. Key measurements to verify include:

Chest width (laid flat, pit-to-pit)
Body length (from highest shoulder point to bottom hem)
Sleeve length (from shoulder seam to cuff)
Shoulder width (seam-to-seam across back)

Tolerances should not exceed ±1cm from stated measurements. The garment should maintain AMIRI's signature oversized fit proportions.

Check current price & stock

How to Inspect AMIRI Drip Logo Sweatshirt QC Photos

When viewing Quality Control (QC) photos for the AMIRI Drip Logo Sweatshirt, pay close attention to the following details:

1. Inspect Logo Embroidery

Examine the Drip logo under good lighting. Check thread tension consistency, color accuracy of the black gradient effect, and ensure no loose threads or skipped stitches. Verify the logo is centered properly on the chest.

2. Check Fabric Quality

Feel the French terry cotton for proper weight and density. Verify the interior brushing is even without excessive pilling. Test the ribbed cuffs and hem for elasticity and recovery after stretching.

3. Verify Stitching Consistency

Inspect all seams for uniform stitch length (10-12 stitches per inch). Pay special attention to shoulder seams, sleeve attachments, and hem stitching. Look for any puckering, loose threads, or irregular tension.

4. Confirm Measurements

Lay the sweatshirt flat and measure chest width, body length, sleeve length, and shoulder width. Compare against the size chart with ±1cm tolerance. Verify the oversized fit proportions match AMIRI's specifications.